Made To Order Weather Louvres

We specialise in the production of made to order weather louvres and grilles. These can be tailored to your needs, in any colour and size. From small residential projects to large-scale commercial applications.

Grilles & Louvres

We collaborate with our suppliers to produce custom-made grilles and louvres. These can be manufactured in any RAL or BS colour and size to meet your project needs. Simply fill in the details below or send us an email to hello@efans.co.uk, and we’ll be happy to provide a free, no-obligation quote.

Types of grilles and louvres we can customise

Egg Crate Grille

Mainly used for internal areas such as bathrooms, and kitchens, where air needs to be quickly expelled

External Weather Louvre

Used externally wherever there is a need for creating resistance to rainwater, excessive noise, etc

Single Deflection Grille

Ideal in places such as painting booths, restaurants, kitchens, and are used internally

Double Deflection Grille (D/D)

You should include the following information in your email:

  • Type of grille or louvre you would like from the list above 
  • The actual opening size of the internal dimensions (Eg, Duct size or hole in the wall/ceiling) See our Measuring Guide
  • Which RAL colour you would like. View colour chart
  • If you require pre-punched holes in the grille / louvre frame as well as flyscreen mesh

Please send the above information to our email hello@efans.co.uk and a member of our team will be in touch to provide a FREE no obligation quote. Alternatively, you can use the form below.

Once the quote is approved, our typical delivery time is between 6-8 working days.

Request a Quote

Please note: The smallest Weather Louvre that can be manufactured is 105mm in either height or width.

Fantastic! Would use again...

We required a number of large weather louvres to be made to order within a tight deadline. eFans Direct went above and beyond to guide us to the correct grille type we needed and helped us in meeting our deadline.


Anna Smith - Director

Amazing work. Great finish...

I just wanted to say thank you to you and your team for the grilles you made for me. They came out even better than I was expecting. Amazing work. I look forward to working with you in the future. Thanks again


Amrik - Director

Frequently Asked Questions

Custom Ductwork

We can manufacture and supply low pressure made to order rectangular or square ductwork. All ductwork is manufactured from galvanised steel with fitted Doby/Mezz type flanging system to allow for easy assembly on-site. Standard straight lengths of ductwork would be supplied in 1250mm long lengths.

Types of ductwork we can customise

Radius Bends

30° 45° & 60° Bends

Square to Rounds

T-Series

Tapers

Offset

Shoes

Meshed Outlets

Rectangular or Square Ductwork

You should include the following information in your email:

  • A drawing, whether it be a technical drawing or a rough sketch sent from site
  • What ductwork flange sizes are required (Eg, 20mm, 25mm, 30mm, etc)
  • Confirmation that the air turns are required in square bends
  • Please include the overall height and the inside or outside diameter of the neck
  • Advise if gasket tape and flange cleats are required to go with your order

Please send the above information to our email hello@efans.co.uk and a member of our team will be in touch to provide a FREE no obligation quote.